Description
General *************************************
AP-AB1208 Air source AC pulse ion bar is the newest developed bar type static eliminator for static removing.
It can be widely used in electronics, textile, optical and other industries.
2、Features ***********************************
(1)Bar shaped and cross over static eliminator
(2)Manufactured by using the latest patented technology of static removing.
(3)Fast speed of static removing, low ion balance and high safety.
(4)LCD on bar body indicates working status for easy use and maintenance
(5)Output voltage adjustable, fit for different static environment.
(6)With alarm function of ion volume, electrode tip cleaning and high voltage fault.
3、Parameter ***************************************
Model AP-AB1208
Output voltage AC±5KV
Output frequency 5,30Hz(default)
Duty factor 10%-90%
Power 10W
Working distance 100-1000mm
Ion balance ≤|±30V| ( AVE )
Discharge time ≤2S(adjust)
Working temperature 0℃-50℃
Working humidity <70%
Air pressure scope 0.1-0.6MPa
Cord length 2.5m
Bar length 380mm,410mm,460mm,510mm……2510mm(spacing distance 50mm)
4. Notice on use and safety warning *********************
(1)Read this manual carefully before installing and using of the device.
(2)Be sure the device reliable ground connected during use, otherwise may cause bar body burn.
(3)Touching of electrode tip during use strictly prohibited.
(4)Do not use this device in the environment where the humidity is greater than 75%.
(5)Input air must be clean and filled air without water, oil and dust particle
(6)It is strictly prohibited to use this equipment in combustible and explosive environment.
(7)Internal maintenance and repair must be carried out by professionals
Spec |
AP-AB1208 Air Source AC Pulse Ion Bar |
Quantity |
100 pieces |
Price |
USD 298 one piece |
Package |
in cartons |