General
AP-DC2452-80 overhead ionizing blower is one of the ionizing blower product series manufactured by Shanghai Anping Static Science&Technology Co.,Ltd.,
AP-DC2452-80 overhead ionizing air blower applies the DC current ion synchronous transmitting technology. High volume of positive and negative ion are generated by two independent transmitting electrode with direct current corona discharge and arrive the object surface where the static to be eliminated most equally. Eliminate static and control the remaining static under international standard.
AP-DC2452-80
is widely used in electronics、plastic、chemical、printing and optics industry etc.
2.Features
(1) Fit for remove static in large area.
(2) Multi unit independent ion transmitting combination with stepless speed regulating.
(3) High speed of static eliminating and good circuit stability.
(4) Front and back cover net unloadable and easy for maintenance.
3. Specifications
Model
AP-DC2452-80
Input Voltage AC220V/50HZ 110V/60HZ
Power
25W
Discharge time
≤2s(450mm to center)
Scope of offectiveness 1000×1200mm
Ion Balancing
≤ ±10V(match ESD STM3.1-2000;IEC 61340-5-1 standard)
Air volume(adjustable)
3*90 CFM
Noise
≤ 60db(150mm to blower)
Ozone thickness ≤0.02ppm (150mm to nozzle center)
Working temperature 0°C - 50°C
Dimension
800×150×70(mm)
Net weight
3930g
Gross weight 5430g
4. Installation
When using AP-DC2452-80 overhead ionizing air blower,the air
transmitter
should be vertical to the object which static to be removed. The trestle should be fixed on stable and plain surface such as wall by screw and nut.
AP-DC2452-80 overhead ionizing air blower should be put near working area or 300~900mm to the objective. By screw the knob on both side of the trestle the horizontal angle can be adjusted so that the optimal
effect of static removing can be achieved.